vlms333.., vlmr333.., vlmk 333.., vlmo333.., vlmy333.. www.vishay.com vishay semiconductors rev. 1.1, 30-apr-13 1 document number: 82383 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 power smd led plcc-2 description the vlm.333.. series is an advanced modification of the vishay vlm.31.. series. it is designed to incorporate larger chips, therefore, capable of withstanding a 50 ma drive current. the package of the vlm.333.. is the plcc-2. it consists of a lead frame which is embedded in a white thermoplast. the reflector inside this package is filled up with clear epoxy. product group and package data ? product group: led ? package: smd plcc-2 ? product series: power ? angle of half intensity: 60 features ? utilizing latest adva nced alingap technology ? available in 8 mm tape ? luminous intensity and color categorized per packing unit ? luminous intensity ratio per packing unit i vmax. /i vmin. ? 1.6 ? thermal resistance r = 400 k/w ? esd-withstand voltage: up to 2 kv according to jesd22-a114-b ? preconditioning accordi ng to jedec level 2a ? compatible with reflow, vapor phase and wave solder processes according to cecc 00802 and j-std-020 ? aec-q101 qualified ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 applications ? traffic signals and signs ? interior and exterior lighting ? dashboard illumination ? indicator and backlighting purposes for audio, video, lcds switches, symbols, illuminated advertising etc note (1) driving the led in reverse direction is suitable for a short term application 19225 parts table part color luminous intensity (mcd) at i f (ma) wavelength (nm) at i f (ma) forward voltage (v) at i f (ma) technology min. typ. max. min. typ. max. min. typ. max. VLMS333T2V2-GS08 super red 355 550 1120 20 626 630 639 20 1.8 2 2.6 20 alingap on si vlms333t2v2-gs18 super red 355 550 1120 20 626 630 639 20 1.8 2 2.6 20 alingap on si vlmr333u1aa-gs08 red 450 750 1400 20 619 625 631 20 1.8 2 2.6 20 alingap on si vlmr333u1aa-gs18 red 450 750 1400 20 619 625 631 20 1.8 2 2.6 20 alingap on si vlmk333u2ab-gs08 amber 560 850 1800 20 611 616 622 20 1.8 2.1 2.6 20 alingap on si vlmk333u2ab-gs18 amber 560 850 1800 20 611 616 622 20 1.8 2.1 2.6 20 alingap on si vlmo333u2ab-gs08 soft orange 560 950 1800 20 600 605 611 20 1.8 2.1 2.6 20 alingap on si vlmo333u2ab-gs18 soft orange 560 950 1800 20 600 605 611 20 1.8 2.1 2.6 20 alingap on si vlmy333u1aa-gs08 yellow 450 750 1400 20 583 589 594 20 1.8 2.15 2.6 20 alingap on si vlmy333u1aa-gs18 yellow 450 750 1400 20 583 589 594 20 1.8 2.15 2.6 20 alingap on si absolute maximum ratings (t amb = 25 c, unless otherwise specified) ? vlm.333... parameter test condition symbol value unit reverse voltage (1) short term application only v r 5v dc forward current t amb ? 73 c (400 k/w) i f 50 ma power di ssipation p v 130 mw junction temperature t j 125 c operating temperature range t amb - 40 to + 100 c storage temperature range t stg - 40 to + 100 c thermal resistance junction/ambient mo unted on pc board (pad size > 16 mm 2 )r thja 400 k/w
vlms333.., vlmr333.., vlmk 333.., vlmo333.., vlmy333.. www.vishay.com vishay semiconductors rev. 1.1, 30-apr-13 2 document number: 82383 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? vlms333.., super red parameter test condition part symbol min. typ. max. unit luminous intensity i f = 20 ma vlms333t2v2 i v 355 550 1120 mcd luminous flux/luminous intensity ? v /i v -3-mlm/mcd dominant wavelength i f = 20 ma ? d 626 630 639 nm peak wavelength i f = 20 ma ? p - 639 - nm spectral bandwidth at 50 % i rel max. i f = 20 ma ?? -18-nm angle of half intensity i f = 20 ma ? - 60- deg forward voltage i f = 20 ma v f 1.822.6v reverse current v r = 5 v i r -0.0110a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? vlmr333.., red parameter test condition part symbol min. typ. max. unit luminous intensity i f = 20 ma vlmr333u1aa i v 450 750 1400 mcd luminous flux/luminous intensity ? v /i v -3-mlm/mcd dominant wavelength i f = 20 ma ? d 619 625 631 nm peak wavelength i f = 20 ma ? p - 632 - nm spectral bandwidth ? at 50 % i rel max. i f = 20 ma ?? -18-nm angle of half intensity i f = 20 ma ? - 60- deg forward voltage i f = 20 ma v f 1.822.6v reverse current v r = 5 v i r -0.0110a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? vlmk333.., amber parameter test condition part symbol min. typ. max. unit luminous intensity i f = 20 ma vlmk333u2ab i v 560 850 1800 mcd luminous flux/luminous intensity ? v /i v -3-mlm/mcd dominant wavelength i f = 20 ma ? d 611 616 622 nm peak wavelength i f = 20 ma ? p - 622 - nm spectral bandwidth ? at 50 % i rel max. i f = 20 ma ?? -18-nm angle of half intensity i f = 20 ma ? - 60- deg forward voltage i f = 20 ma v f 1.8 2.1 2.6 v reverse current v r = 5 v i r -0.0110a optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? vlmo333.., soft orange parameter test condition part symbol min. typ. max. unit luminous intensity i f = 20 ma vlmo333u2ab i v 560 950 1800 mcd luminous flux/luminous intensity ? v /i v -3-mlm/mcd dominant wavelength i f = 20 ma ? d 600 605 611 nm peak wavelength i f = 20 ma ? p - 611 - nm spectral bandwidth ? at 50 % i rel max. i f = 20 ma ?? -17-nm angle of half intensity i f = 20 ma ? - 60- deg forward voltage i f = 20 ma v f 1.8 2.1 2.6 v reverse current v r = 5 v i r -0.0110a
vlms333.., vlmr333.., vlmk 333.., vlmo333.., vlmy333.. www.vishay.com vishay semiconductors rev. 1.1, 30-apr-13 3 document number: 82383 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note ? wavelengths are tested at a current pulse duration of 25 ms. note ? luminous intensity is tested at a current pulse duration of 25 ms and an accuracy of 11 %. ? the above type numbers repres ent the order groups which include only a few brightness groups. only one group will be shipped on each reel (there will be no mixing of two groups on each reel). ? in order to ensure availability, single brightness groups will not be orderable. ? in a similar manner for colors where wavelength groups are measured and binned, single wave length groups wi ll be shipped on any one reel. ? in order to ensure availability, single wavelength groups will not be orderable. ? ? ? ? ? ? ? ? ? ? ? ? ? optical and electrical characteristics (t amb = 25 c, unless otherwise specified) ? vlmy333.., yellow parameter test condition part symbol min. typ. max. unit luminous intensity i f = 20 ma vlmy333u1aa i v 450 750 1400 mcd luminous flux/luminous intensity ? v /i v -3-mlm/mcd dominant wavelength i f = 20 ma ? d 583 589 594 nm peak wavelength i f = 20 ma ? p - 591 - nm spectral bandwidth at 50 % i rel max. i f = 20 ma ?? -17-nm angle of half intensity i f = 20 ma ? - 60- deg forward voltage i f = 20 ma v f 1.82.152.6 v reverse current v r = 5 v i r -0.0110a color classification group dom. wavelength (nm) amber soft orange yellow min. max. min. max. min. max. 1 611 618 2 614 622 600 603 583 586 3 602 605 585 588 4 604 607 587 590 5 606 609 589 592 6 608 611 591 594 luminous intensity classification group light intensity (mcd) standard optional min. max. t 2 355 450 u 1 450 560 2 560 710 v 1 710 900 2 900 1120 a a 1120 1400 b 1400 1800 crossing table vishay osram vlms333t2v2 ls t67f-t2v2-1-1 vlmr333u1aa lr t67f-u1aa-1-1 vlmk333u2ab la t67f-u2ab-24-1 vlmo333u2ab lo t67f-u2ab-24-1 vlmy333u1aa ly t67f-u1aa-36-1
vlms333.., vlmr333.., vlmk 333.., vlmo333.., vlmy333.. www.vishay.com vishay semiconductors rev. 1.1, 30-apr-13 4 document number: 82383 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - maximum permissible forward current vs. ambient temperature fig. 2 - relative luminous in tensity vs. angular displacement fig. 3 - forward current vs. pulse length fig. 4 - relative intensity vs. wavelength fig. 5 - forward current vs. forward voltage fig. 6 - relative luminous intensity vs. forward current 0 10 20 30 40 50 60 70 80 90 100 0 25 50 75 100 125 16784 r thja = 400 k/w i f - max. permissible forward current (ma) t amb - ambient temperature (c) 0.4 0.2 0 95 10319 0.6 0.9 0.8 0 30 10 20 40 50 60 70 80 0.7 1.0 i v rel - relative luminous intensity ? - angular displacement 0.00 0.02 0.04 0.06 0.08 0.10 0.12 t p - pulse length (s) i f - forward current (a) 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 t p /t = 0.005 0.05 0.5 17044 22184 0 0.2 0.4 0.6 0.8 1.0 1.2 540 560 580 600 620 640 660 680 i rel - relative inten s ity - wavelenght (nm) yellow s oft orange amber red s uper red 22185 1 10 100 1 1.5 2 2.5 3 3.5 i f - forward current (ma) v f - forward voltage (v) yellow s oft orange s uper red amber red 22186 0.01 0.1 1 10 110100 i v rel - relative luminou s inten s ity i f - forward current (ma) yellow s oft orange amber red s uper red
vlms333.., vlmr333.., vlmk 333.., vlmo333.., vlmy333.. www.vishay.com vishay semiconductors rev. 1.1, 30-apr-13 5 document number: 82383 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 7 - change of forward voltage vs. ambient temperature fig. 8 - relative luminous in tensity vs. ambient temperature fig. 9 - change of dominant wa velength vs. ambient temperature ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? package dimensions in millimeters - 300 - 200 - 100 0 100 200 300 - 40 - 20 0 20 40 60 80 100 v f - change of forward voltage (mv) t amb - ambient temperature (c) yellow s oft orange amber red s uper red 22187 22188 0 0.5 1.0 1.5 2.0 2.5 - 40 - 20 0 20 40 60 80 100 i v rel - relative luminou s inten s ity t amb - ambient temperature (c) yellow s oft orange s uper red amber red 22189 - 8 - 6 - 4 - 2 0 2 4 6 8 10 - 40 - 20 0 20 40 60 80 100 ? d - change dominant wavelength (nm) t amb - ambient temperature (c) s uper red red amber s oft orange yellow mounting pad layout 1.2 2.6 (2.8) 1.6 (1.9) 4 4 area covered with solder resist drawing-no.: 6.541-5067.02-4 issue: 4; 19.07.10 20767 technical drawings according to din specifications pin identification 2.8 0.15 1.75 0.1 2.2 0.9 3.5 0.2 3 + 0.15 ? 2.4 ac
vlms333.., vlmr333.., vlmk 333.., vlmo333.., vlmy333.. www.vishay.com vishay semiconductors rev. 1.1, 30-apr-13 6 document number: 82383 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 method of taping/polarity and tape and reel smd led (vlmx333..-series) vishays leds in smd packages are available in an antistatic 8 mm blister tape (i n accordance with din iec 40 (co) 564) for automatic compo nent insertion. the blister tape is a plastic strip with impressed component cavities, covered by a top tape. taping of vlmx333.. fig. 10 - tape dimens ions in mm for plcc-2 reel package dimension in millimeters for smd leds, tape option gs08 ? (= 1500 pcs.) fig. 11 - reel dimensions - gs08 reel package dimens ion in millimeters for smd leds, tape option gs18 ? (= 8000 pcs.) preferred fig. 12 - reel dimensions - gs18 soldering profile fig. 13 - vishay lead (pb)-free reflow soldering profile (acc. to j-std-020) fig. 14 - double wave soldering of opto devices (all packages) adhesive tape component cavity blister tape 94 8670 0.25 2.2 2.0 1.85 1.65 4.1 3.9 2.05 1.95 3.5 3.1 4.1 3.9 1.6 1.4 8.3 7.7 5.75 5.25 3.6 3.4 4.0 3.6 16 025 anode cathode 180 178 4.5 3.5 2.5 1.5 13.00 12.75 63.5 60.5 14.4 max. 10.0 9.0 120 94 8665 identification label: vishay type group tape code production code quantity 321 329 identification 4.5 3.5 2.5 1.5 13.00 12.75 62.5 60.0 14.4 max. 10.4 8.4 120 18857 label: vishay type group tape code production code quantity 0 50 100 150 200 250 300 0 50 100 150 200 250 300 time (s) temperature (c) 240 c 245 c max. 260 c max. 120 s max. 100 s 217 c max. 30 s max. ramp up 3 c/s max. ramp down 6 c/s 19885 ir reflow soldering profile for lead (pb)-free soldering preconditioning acc. to jedec level 2a max. 2 cycles allowed 255 c 235 c to 260 c 2 k/s ca. 200 k/s second wave first wave 5 s full line: typical dotted line: process limits time (s) temperature (c) lead temperature 300 250 200 150 100 50 0 0 50 100 150 200 250 948626-1 ttw soldering (acc. to cecc00802) 100 c to 130 c forced cooling ca. 2 k/s ca. 5 k/s
vlms333.., vlmr333.., vlmk 333.., vlmo333.., vlmy333.. www.vishay.com vishay semiconductors rev. 1.1, 30-apr-13 7 document number: 82383 for technical ques tions, contact: led@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bar code product label (example) a. type of component b. manufacturing plant c. sel - selection code (bin): ? e.g.: r2 = code for luminous intensity group ? 3 = code for color group d. date code year/week e. day code (e.g. 1: monday) f. batch no. g. total quantity h. company code dry packing the reel is packed in an anti-humidity bag to protect the devices from absorbing moisture during transportation and storage. final packing the sealed reel is packed in to a cardboard box. a secondary cardboard box is used for shipping purposes. recommended method of storage dry box storage is recommended as soon as the aluminum bag has been opened to preve nt moisture absorption. the following conditions should be observed, if dry boxes are not available: ? storage temperature 10 c to 30 c ? storage humidity ? 60 % rh max. after more than 672 h under these conditions moisture content will be too high for reflow soldering. in case of moisture absorptio n, the devices will recover to the former condition by drying under the following condition: 192 h at 40 c + 5 c/- 0 c and < 5 % rh (dry air/nitrogen) or ? 96 h at 60 c + 5 c and < 5 % rh for all device containers or ? 24 h at 100 c + 5 c not suitable for reel or tubes. an eia jedec standard jesd22 -a112 level 2a label is included on all dry bags. example of jesd22-a1 12 level 2a label esd precaution proper storage and handling pr ocedures should be followed to prevent esd damage to the devices especially when they are removed from the antistatic shielding bag. electro-static sensitive devices warning labels are on the packaging. vishay semiconductors standard ? bar code label the vishay semiconductors st andard bar code labels are printed at final packing areas. the labels are on each packing unit and contain vishay semiconductors specific data. 106 37 vishay a h bc d e f g 20195 aluminum bag label reel 15973 l e v e l caution this bag contains moisture ? sensitive devices 1. shelf life in sealed bag 12 months at <40c and < 90% relative humidity (rh) 2. after this bag is opened devices that will be subjected to infrared reflow, vapor - phase reflow, or equivalent processing (peak package body temp. 260c) must be: a) mounted within 672 hours at factory condition of < 30c/60%rh or b) stored at <1 0% rh. 3. devices require baking before mounting if: a) humidity indicator card is >10% when read at 23c + 5c or b) 2a or 2b is not met. 4. if baking is required, devices may be baked for: 192 hours at 40c + 5c/ - 0c and <5%rh (dry air/nitrogen) or 96 hours at 605 o cand <5%rh for all device containers or 24 hours at 1005c not suitable for reels or tubes bag seal date: ______________________________ (if blank, see bar code label) note: level defined by eia jedec standard jesd22 - a113 2a 19786
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
